Download the 2019 Call For Papers PDF.
Original technical submissions on, but not limited to, the following topics are invited:
1) SYSTEM-LEVEL CAD
1.1 System Design
- System-level specification, modeling, and simulation
- System design flows and methods
- HW/SW co-design, co-simulation, co-optimization, and co-exploration
- HW/SW platforms for rapid prototyping
- System design case studies and applications
- System-level issues for 3D integration
- Micro-architectural transformation
- Memory architecture and system synthesis
- System communication architecture
- Network-on-chip design methodologies and CAD
- Modeling and simulation of heterogeneous platforms
- High-level synthesis for heterogeneous computing
- Power/performance analysis of heterogeneous and cloud platforms
- Programming environment of heterogeneous computing
- Application driven heterogeneous platforms for big data, machine learning etc.
- Applications and designs for systems based on optical devices
1.2 Embedded Systems and Cyberphysical Systems
- Multi-core/multi-processors systems
- HW/SW co-design for embedded systems
- Static and dynamic reconfigurable architectures
- Memory hierarchies and management
- System-level consideration of custom memory/storage architectures
- Application-specific instruction-set processors (ASIPs)
- CAD for Internet-of-Things (IoT) and sensor networks
- Design issues for Internet-of-Things (IoT) Devices
- Modeling and analysis of CPS
- CAD for automotive systems and power electronics
- Dependable and safe CPS design
- Analysis and optimization of data centers
- CAD for display electronics
- Green computing (smart grid, energy, solar panels, etc.)
1.3 Neural Network and Neuromorphic Computing
- Hardware and devices for neuromorphic and neural network computing
- Design method for learning on a chip
- Systems for neural computing (including deep neural networks)
- Neural network acceleration techniques including GPGPU, FPGA and dedicated
- ASICs
- CAD for bio-inspired and neuromorphic systems
1.4 Embedded Systems Software and Software Security
- Real-time software and operating systems
- Middleware and virtual machines, runtime support and resource management
- Timing analysis and WCET
- Profiling and compilation techniques, domain-specific embedded libraries
- Design exploration, synthesis, validation, verification, and optimization
- Software techniques and programming models for multicores, GPUs, and multithreaded embedded architectures
- System and embedded software security techniques
- Malware and Cloud security
- Security and privacy for the Internet of Things
- Embedded software forensics
1.5 Hardware Security
- Hardware-based security (CAD for PUF’s, RNG, AES etc)
- Detection and prevention of hardware Trojans
- Side-channel attacks, fault attacks and countermeasures
- Split Manufacturing for security
- Design and CAD for security
- Security implications of CAD
- Cyberphysical system security
- Nanoelectronic security
- Supply chain security and anti-counterfeiting
1.6 Low Power and Approximate Computing in System Design
- Power and thermal estimation, analysis, optimization, and management techniques for hardware and software systems
- Energy- and thermal aware application mapping and scheduling
- Energy- and thermal-aware dark silicon system design and optimization
- Energy- and thermal-aware architectures, algorithms and techniques
- Run-time management for the dark silicon
- New hardware techniques for approximate/stochastic computing
2) SYNTHESIS, VERIFICATION, & PHYSICAL DESIGN
2.1 High-Level, Behavioral, and Logic Synthesis and Optimization
- High-level/Behavioral/Logic synthesis
- Technology-independent optimization and technology mapping
- Functional and logic timing ECO
- Resource scheduling, allocation, and synthesis
- Interaction between logic synthesis and physical design
2.2 Testing, Validation, Simulation, and Verification
- High-level/Behavioral/Logic modeling and validation
- High-level/Behavioral/Logic simulation
- Formal, semi-formal, and assertion-based verification
- Equivalence and property checking
- Emulation and hardware simulation/acceleration
- Post-silicon functional validation
- Digital fault modeling and simulation
- Delay, current-based, low-power test
- ATPG, BIST, DFT, and compression
- Memory test and repair
- Core, board, system, and 3D IC test
- Post-silicon validation and debug
- Analog, mixed-signal, and RF test
2.3 Cell-Library Design, Partitioning, Floorplanning, Placement
- Cell-library design and optimization
- Transistor and gate sizing
- High-level physical design and synthesis
- Estimation and hierarchy management
- 2D and 3D partitioning, floorplanning, and placement
- Post-placement optimization
- Buffer insertion and interconnect planning
2.4 Clock Network Synthesis, Routing, and Post-Layout Optimization and Verification
- 2D and 3D clock network synthesis
- 2D and 3D global and detailed routing
- Package-/Board-level routing and chip-package-board co-design
- Post-layout/-silicon optimization
- Layout and routing issues for optical interconnects
3) SOC ANALYSIS, DESIGN, SIMULATION, & TESTING
3.1 Design for Manufacturability and Design for Reliability
- Process technology characterization, extraction, and modeling
- CAD for design/manufacturing interfaces
- CAD for reticle enhancement and lithography-related design
- Variability analysis and statistical design and optimization
- Yield estimation and design for yield
- Physical verification and design rule checking
- DFM for emerging devices (3D, nanophotonics, non-volatile logic/memory, etc.)
- Machine learning for smart manufacturing and process control
- Analysis and optimization for device-level reliability issues (stress, aging effects,
- ESD, etc.)
- Analysis optimization for interconnect reliability issues (electromigration, thermal,
- etc.)
- Reliability issues related to soft errors
- Design for resilience and robustness
- Reliability issues for emerging devices (3D, optical, non-volatile, etc.)
3.2 Timing, Power and Signal Integrity Analysis and Optimization
- Deterministic and statistical static timing analysis and optimization
- Power and leakage analysis and optimization
- Circuit and interconnect-level low power design issues
- Power/ground network analysis and synthesis
- Signal integrity analysis and optimization
3.3 CAD for Analog/Mixed-Signal/RF and Multi-Domain Modeling
- CAD for analog, mixed-signal, RF
- CAD for mixed-domain (semiconductor, nanoelectronic, MEMS, and electrooptical) devices, circuits, and systems
- CAD for nanophotonics and optical devices
- Analog, mixed-signal, and RF noise modeling and simulation
- Device, interconnect and circuit extraction and simulation
- Package modeling and analysis
- EM simulation and optimization
- Behavior modeling of devices and interconnect
- Modeling of complex dynamical systems (molecular dynamics, fluid dynamics, computational finance, etc.)
4) CAD FOR EMERGING TECHNOLOGIES, PARADIGMS, & APPLICATIONS
4.1 Biological Systems and Electronics, Brain Inspired Computing, and New Computing Paradigms
- CAD for biological computing systems
- CAD for systems and synthetic biology
- CAD for bio-electronic devices, bio-sensors, MEMS, and systems
4.2 Nanoscale and Post-CMOS Systems
- New device structures and process technologies
- New memory technologies (flash, phase change memory, STT-RAM, memristor, etc.)
- Nanotechnologies, nanowires, nanotubes, graphene, etc.
- Quantum computing
- Optical devices, computing, and communication
SUBMISSION DETAILS
Paper submissions must be made through the online submission system at the ICCAD website: https://www.softconf.com/j/iccad2019
Regular papers will be reviewed as finished papers; preliminary submissions will be at a disadvantage.
Authors are asked to submit their work in two stages. In stage one (abstract submission), a title, abstract, and a list of all co-authors must be submitted via the ICCAD web submission site. In stage two (paper submission), the paper itself is submitted. Authors are responsible for ensuring that their paper submission meets all guidelines, and that the PDF is readable.
Deadline for Abstract Submissions: 5:00pm PDT (GMT -07:00) Monday, April 1, 2019
Deadline for Paper Submissions: 5:00pm PDT (GMT -07:00) Monday, April 8, 2019
We always have several authors contact the ICCAD office asking for a deadline extension. Due to the limited review cycle, NO extensions are granted for ANY reason.
REGULAR PAPER SUBMISSIONS
- All papers must be in PDF format only, with savable text.
- Each paper must be no more than 8 pages (including the abstract, figures, tables, and references), double-columned, 9pt or 10pt font.
- Your submission must not include information that serves to identify the authors of the manuscript, such as name(s) or affiliation(s) of the author(s), anywhere in the manuscript, abstract, or in the embedded PDF data. References and bibliographic citations to the author(s) own published works or affiliations should be made in the third person
- Submissions not adhering to these rules, or determined to be previously published (this includes pre-prints publicly available on personal or other websites, such as arXiv, or publicly available internal memoranda with author names divulged) or simultaneously submitted to another conference, or journal, will be summarily rejected. Internal memoranda with full content not publicly available, and with author names not divulged, may be submitted.
IMPORTANT: Final camera-ready versions must be identical to the submitted papers with the following exceptions; inclusion of author names/affiliation, correction of identified errors, addressing reviewer-demanded changes. No other modifications of any kind are allowed including modification of title, change of the author list, reformatting, restyling, rephrasing, removing figures/results/text, etc. The TPC Chairs reserve the right to finally reject any manuscripts not adhering to these rules. A report detailing all the revisions made must be submitted together with the final camera-ready manuscript once any revision is conducted.
TEMPLATES
Paper templates are available below; authors are recommended to format their papers based on one of these templates: Suggested IEEE Proceedings Paper Template
NOTIFICATION OF ACCEPTANCE
Authors will be notified of acceptance on or before Friday, June 21, 2019. Final paper guidelines will be sent at that time.
PROCEEDINGS
The deadline for final papers is Friday, July 26, 2019. Accepted papers are allowed six pages in the conference proceedings free of charge. Each additional page beyond six pages is subject to the page charge at $150.00 per page up to the eight-page limit. IEEE will hold the copyright for ICCAD 2019 proceedings. Authors of accepted papers must sign an IEEE copyright release form for their paper.
CONFERENCE REGISTRATION
At least one author per accepted paper must register by Friday, July 26, 2019, at the discounted speaker’s registration rate. Failure to register will result in your paper being removed from the conference proceedings. IEEE reserves the right to exclude a paper from distribution after the conference (e.g., removal from IEEE Xplore) if the paper is not presented at the conference.
ACM/IEEE WILLIAM J MCCALLA ICCAD BEST PAPER AWARD
The awards are split into three categories. Two papers from this year's ICCAD conference, one from front-end and one from back-end, will be awarded with this prestigious award. The winners will be chosen from nominated papers after a thorough and competitive process by area-specific selection committees and announced at the opening session.
One paper from the 2008 and 2009 editions of ICCAD will be selected for the 10-year retrospective most influential paper award as evidenced by impact on the research community reflected in citations, on the vendor community via its use in an industrial setting, or by initiating new research venues during the past decade. Nominations from the community are welcome and can be sent to Rolf Drechsler, Technical Program Vice Chair at [email protected].
CALL FOR WORKSHOP, TUTORIAL, SPECIAL SESSION, PANEL, AND KEYNOTE PROPOSALS
All are due on Thursday, April 11, 2019. Click here for more information.