IMPACT SCORE JOURNAL RANKING CONFERENCE RANKING Conferences Journals Workshops Seminars SYMPOSIUMS MEETINGS BLOG LaTeX 5G Tutorial Free Tools

Search About Journals, Conferences, and Book Series

Lasers in Manufacturing and Materials Processing- Impact Score, Overall Ranking, h-index, SJR, Rating, Publisher, ISSN, and Other Important Metrics

Last Updated on May 27, 2022

Impact Score

2.45

h-Index

 14

Rank

 10053

SJR

 0.498

Note: The impact score shown here is equivalent to the average number of times documents published in a journal/conference in the past two years have been cited in the current year (i.e., Cites / Doc. (2 years)). It is based on Scopus data and can be a little higher or different compared to the impact factor (IF) produced by Journal Citation Report. Please refer to the Web of Science data source to check the exact journal impact factor ™ (Thomson Reuters) metric.

Important Metrics

Title Lasers in Manufacturing and Materials Processing
Abbreviation Lasers Manuf. Mater. Process.
Publication Type Journal
Subject Area, Categories, Scope Industrial and Manufacturing Engineering (Q2); Instrumentation (Q2); Modeling and Simulation (Q2); Nuclear and High Energy Physics (Q2)
h-index 14
Overall Rank/Ranking 10053
SCImago Journal Rank (SJR) 0.498
Impact Score 2.45
Publisher Springer US
Country United States
ISSN 21967237, 21967229




About Lasers in Manufacturing and Materials Processing


Lasers in Manufacturing and Materials Processing is a journal covering the technologies/fields/categories related to Industrial and Manufacturing Engineering (Q2); Instrumentation (Q2); Modeling and Simulation (Q2); Nuclear and High Energy Physics (Q2). It is published by Springer US. The overall rank of Lasers in Manufacturing and Materials Processing is 10053. According to SCImago Journal Rank (SJR), this journal is ranked 0.498. SCImago Journal Rank is an indicator, which measures the scientific influence of journals. It considers the number of citations received by a journal and the importance of the journals from where these citations come. SJR acts as an alternative to the Journal Impact Factor (or an average number of citations received in last 2 years). This journal has an h-index of 14. The best quartile for this journal is Q2.

The ISSN of Lasers in Manufacturing and Materials Processing journal is 21967237, 21967229. An International Standard Serial Number (ISSN) is a unique code of 8 digits. It is used for the recognition of journals, newspapers, periodicals, and magazines in all kind of forms, be it print-media or electronic. Lasers in Manufacturing and Materials Processing is cited by a total of 200 articles during the last 3 years (Preceding 2021).


Lasers in Manufacturing and Materials Processing Impact Score 2021-2022


The impact score (IS) 2021 of Lasers in Manufacturing and Materials Processing is 2.45, which is computed in 2022 as per its definition. Lasers in Manufacturing and Materials Processing IS is increased by a factor of 0.78 and approximate percentage change is 46.71% when compared to preceding year 2020, which shows a rising trend. The impact score (IS), also denoted as Journal impact score (JIS), of an academic journal is a measure of the yearly average number of citations to recent articles published in that journal. It is based on Scopus data.

Table Setting

Lasers in Manufacturing and Materials Processing Impact Score 2022 Prediction


IS 2021 of Lasers in Manufacturing and Materials Processing is 2.45. If the same upward trend persists, impact score may rise in 2022 as well.


Impact Score Trend


Year wise Impact Score (IS) of Lasers in Manufacturing and Materials Processing. Based on Scopus data.


Year Impact Score (IS)
2022/2023 Coming Soon
2021 2.45
2020 1.67
2019 1.49
2018 1.24
2017 1.17
2016 1.39
2015 1.50
2014 0.00

Lasers in Manufacturing and Materials Processing h-index


  Table Setting

Lasers in Manufacturing and Materials Processing has an h-index of 14. It means 14 articles of this journal have more than 14 number of citations. The h-index is a way of measuring the productivity and citation impact of the publications. The h-index is defined as the maximum value of h such that the given journal/author has published h papers that have each been cited at least h number of times.




Lasers in Manufacturing and Materials Processing ISSN


The ISSN of Lasers in Manufacturing and Materials Processing is 21967237, 21967229. ISSN stands for International Standard Serial Number.

An ISSN is a unique code of 8 digits. It is used for the recognition of journals, newspapers, periodicals, and magazines in all kind of forms, be it print-media or electronic.

Table Setting

Lasers in Manufacturing and Materials Processing Rank and SCImago Journal Rank (SJR)


The overall rank of Lasers in Manufacturing and Materials Processing is 10053. According to SCImago Journal Rank (SJR), this journal is ranked 0.498. SCImago Journal Rank is an indicator, which measures the scientific influence of journals. It considers the number of citations received by a journal and the importance of the journals from where these citations come.


Lasers in Manufacturing and Materials Processing Publisher


Table Setting

Lasers in Manufacturing and Materials Processing is published by Springer US. It's publishing house is located in United States. Coverage history of this journal is as following: 2014-2021. The organization or individual who handles the printing and distribution of printed or digital publications is known as Publisher.


Call For Papers


Visit the official website of the journal/conference to check the further details about the call for papers.


Abbreviation


The IS0 4 standard abbreviation of Lasers in Manufacturing and Materials Processing is Lasers Manuf. Mater. Process.. This abbreviation ('Lasers Manuf. Mater. Process.') is well recommended and approved for the purpose of indexing, abstraction, referencing and citing goals. It meets all the essential criteria of ISO 4 standard.

ISO 4 (International Organization for Standardization 4) is an international standard that defines a uniform and consistent system for abbreviating serial publication titles and journals.


How to publish in Lasers in Manufacturing and Materials Processing


If your research field is/are related to Industrial and Manufacturing Engineering (Q2); Instrumentation (Q2); Modeling and Simulation (Q2); Nuclear and High Energy Physics (Q2), then please visit the official website of this journal.


Acceptance Rate


The acceptance rate/percentage of any academic journal/conference depends upon many parameters. Some of the critical parameters are listed below.

  • The demand or interest of researchers/scientists in publishing in a specific Journal/Conference.
  • Peer review complexity and timeline.
  • The mix of unsolicited and invited submissions.
  • The time it takes from manuscript submission to final publication.
  • And Many More.

It is essential to understand that the acceptance rate/rejection rate of papers varies among journals. Some Journals considers all the manuscripts submissions as a basis of acceptance rate computation. On the other hand, few consider the only manuscripts sent for peer review or few even not bother about the accurate maintenance of total submissions. Hence, it can provide a rough estimation only.

The best way to find out the acceptance rate is to reach out to the associated editor or to check the official website of the Journal/Conference.


Credits and Sources


  • Scimago Journal & Country Rank (SJR), https://www.scimagojr.com/
  • Journal Impact Factor, https://clarivate.com/



Impact Score, h-Index, and Other Important Details of These Journals, Conferences, and Books


Journal/Conference/Workshop/Book Title Type Ranking Publisher h-index Impact Score
Aquaculture Nutrition journal 5255 Wiley-Blackwell Publishing Ltd 83 3.69
Journal of Biological Chemistry journal 1401 Elsevier Inc. 528 4.81
Revista de la Sociedad Entomologica Argentina journal 20665 Sociedad Entomologica Argentina 2 0.50
Current Research in Translational Medicine journal 6273 Elsevier Masson s.r.l. 61 3.55
Journal of Men's Studies, The journal 9005 SAGE Publications Inc. 15 2.06
Journal of Self-Governance and Management Economics (discontinued) journal 27152 Addleton Academic Publishers 14 6.05
Gene Expression journal 2040 Cognizant Communication Corporation 50 3.08
Journal of Pharmaceutical Policy and Practice journal 7181 BioMed Central Ltd. 21 3.33
Tax Policy and the Economy book series 4792 University of Chicago Press 15 0.92
Clinics in Dermatology journal 6069 Elsevier Inc. 94 2.29

Check complete list




Year wise Impact Score (IS) of Lasers in Manufacturing and Materials Processing

Impact Score Table

Year Impact Score (IS)
2022/2023 Coming Soon
2021 2.45
2020 1.67
2019 1.49
2018 1.24
2017 1.17
2016 1.39
2015 1.50
2014 0.00



Top Journals/Conferences in Industrial and Manufacturing Engineering

Journal of Operations Management
John Wiley and Sons Inc. | Netherlands

International Journal of Machine Tools and Manufacture
Elsevier Ltd. | United Kingdom

Production and Operations Management
Wiley-Blackwell | United States

Additive Manufacturing
Elsevier BV | Netherlands

Chemical Engineering Journal
Elsevier | Netherlands

International Journal of Production Economics
Elsevier | Netherlands

CIRP Annals - Manufacturing Technology
Elsevier USA | United States

Journal of Manufacturing Systems
Elsevier | Netherlands

Composites Part B: Engineering
Elsevier Ltd. | United Kingdom

Advanced Materials Technologies
Wiley-Blackwell | United States

See All

Top Journals/Conferences in Instrumentation

Nature Electronics
Nature Publishing Group | United Kingdom

IEEE Geoscience and Remote Sensing Magazine
IEEE Geosciene and Remote Sensing Society | United States

ACS Sensors
American Chemical Society | United States

Sensors and Actuators, B: Chemical
Elsevier | Netherlands

Structural Dynamics
AAPM - American Association of Physicists in Medicine | United States

Ultramicroscopy
Elsevier | Netherlands

Chinese Physics C
IOP Publishing Ltd. | United Kingdom

Journal of Synchrotron Radiation
International Union of Crystallography | United Kingdom

IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Institute of Electrical and Electronics Engineers Inc. | United States

ISA Transactions
ISA - Instrumentation, Systems, and Automation Society | United States

See All

Top Journals/Conferences in Modeling and Simulation

Structural Equation Modeling
Psychology Press Ltd | United Kingdom

npj Computational Materials
Nature Publishing Group | United Kingdom

Geoscientific Model Development
Copernicus Gesellschaft mbH | Germany

NPG Asia Materials
Nature Publishing Group | United States

mSystems
American Society for Microbiology | United States

PLoS Computational Biology
Public Library of Science | United States

Mathematical Models and Methods in Applied Sciences
World Scientific Publishing Co. Pte Ltd | Singapore

European Journal of Operational Research
Elsevier | Netherlands

Energy
Elsevier Ltd. | United Kingdom

Journal of Computational Physics
Academic Press Inc. | United States

See All

Top Journals/Conferences in Nuclear and High Energy Physics

Progress in Particle and Nuclear Physics
Elsevier | Netherlands

Annual Review of Nuclear and Particle Science
Annual Reviews Inc. | United States

Nuclear Data Sheets
Academic Press Inc. | United States

Progress in Nuclear Magnetic Resonance Spectroscopy
Elsevier | Netherlands

Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics
Elsevier | Netherlands

Nuclear Fusion
IOP Publishing Ltd. | United Kingdom

Physical Review C
American Physical Society | United States

Journal of Physics G: Nuclear and Particle Physics
IOP Publishing Ltd. | United Kingdom

Nuclear Materials and Energy
Elsevier Ltd. | United Kingdom

European Physical Journal A
Springer New York | United States

See All