IMPACT SCORE JOURNAL RANKING CONFERENCE RANKING Conferences Journals Workshops Seminars SYMPOSIUMS MEETINGS BLOG LaTeX 5G Tutorial Free Tools

Search About Journals, Conferences, and Book Series

International Journal of Machine Tools and Manufacture

Impact, Factor and Metrics, Impact Score, Ranking, h-index, SJR, Rating, Publisher, ISSN, and More

Last Updated on October 31, 2023

Impact Score

2022-2023

14.12

h-Index

2022-2023

 179

Rank

2022-2023

 452

SJR

2022-2023

 3.579

Note: The impact score or impact index shown here is equivalent to the average number of times documents published in a journal/conference in the past two years have been cited in the current year (i.e., Cites / Doc. (2 years)). It is based on Scopus data and can be a little higher or different compared to the impact factor (IF) produced by Journal Citation Report. Please refer to the Web of Science data source to check the exact journal impact factor ™ (Thomson Reuters) metric.

Important Metrics and Factor

Title International Journal of Machine Tools and Manufacture
Abbreviation Int. J. Mach. Tools Manuf.
Publication Type Journal
Subject Area, Categories, Scope Industrial and Manufacturing Engineering (Q1); Mechanical Engineering (Q1)
h-index 179
Overall Rank/Ranking 452
SCImago Journal Rank (SJR) 3.579
Impact Score 14.12
Publisher Elsevier Ltd.
Country United Kingdom
ISSN 08906955
Best Quartile Q1
Coverage History 1987-2022




About International Journal of Machine Tools and Manufacture


International Journal of Machine Tools and Manufacture is a journal covering the technologies/fields/categories related to Industrial and Manufacturing Engineering (Q1); Mechanical Engineering (Q1). It is published by Elsevier Ltd.. The overall rank of International Journal of Machine Tools and Manufacture is 452. According to SCImago Journal Rank (SJR), this journal is ranked 3.579. SCImago Journal Rank is an indicator, which measures the scientific influence of journals. It considers the number of citations received by a journal and the importance of the journals from where these citations come. SJR acts as an alternative to the Journal Impact Factor (or an average number of citations received in last 2 years). This journal has an h-index of 179. The best quartile for this journal is Q1.

The ISSN of International Journal of Machine Tools and Manufacture journal is 08906955. An International Standard Serial Number (ISSN) is a unique code of 8 digits. It is used for the recognition of journals, newspapers, periodicals, and magazines in all kind of forms, be it print-media or electronic. International Journal of Machine Tools and Manufacture is cited by a total of 2771 articles during the last 3 years (Preceding 2022).


International Journal of Machine Tools and Manufacture Impact IF 2022-2023


The Impact IF 2022 of International Journal of Machine Tools and Manufacture is 14.12, which is computed in 2023 as per its definition. International Journal of Machine Tools and Manufacture IF is increased by a factor of 3.99 and approximate percentage change is 39.39% when compared to preceding year 2021, which shows a rising trend. The impact IF, also denoted as Journal impact score (JIS), of an academic journal is a measure of the yearly average number of citations to recent articles published in that journal. It is based on Scopus data.

Table Setting

International Journal of Machine Tools and Manufacture Impact IF 2023 Prediction


Impact IF 2022 of International Journal of Machine Tools and Manufacture is 14.12. If the same upward trend persists, Impact IF may rise in 2023 as well.


Impact IF Trend


Year wise Impact IF of International Journal of Machine Tools and Manufacture. Based on Scopus data.


Year Impact IF
2023/2024 Coming Soon
2022 14.12
2021 10.13
2020 8.27
2019 8.65
2018 7.38
2017 6.01
2016 4.93
2015 4.39
2014 4.62

International Journal of Machine Tools and Manufacture h-index


  Table Setting

International Journal of Machine Tools and Manufacture has an h-index of 179. It means 179 articles of this journal have more than 179 number of citations. The h-index is a way of measuring the productivity and citation impact of the publications. The h-index is defined as the maximum value of h such that the given journal/author has published h papers that have each been cited at least h number of times.




International Journal of Machine Tools and Manufacture ISSN


The ISSN of International Journal of Machine Tools and Manufacture is 08906955. ISSN stands for International Standard Serial Number.

An ISSN is a unique code of 8 digits. It is used for the recognition of journals, newspapers, periodicals, and magazines in all kind of forms, be it print-media or electronic.

Table Setting

International Journal of Machine Tools and Manufacture Rank and SCImago Journal Rank (SJR)


The overall rank of International Journal of Machine Tools and Manufacture is 452. According to SCImago Journal Rank (SJR), this journal is ranked 3.579. SCImago Journal Rank is an indicator, which measures the scientific influence of journals. It considers the number of citations received by a journal and the importance of the journals from where these citations come.

SJR of International Journal of Machine Tools and Manufacture by Year


Year SJR
2023/2024 Coming Soon
2022 3.579
2021 3.165
2020 3.418
2019 3.979
2018 3.683
2017 2.700
2016 2.629
2015 2.618
2014 3.398

Ranking of International Journal of Machine Tools and Manufacture by Year


Year Ranking
2023/2024 Coming Soon
2022 452
2021 543
2020 523
2019 387
2018 457
2017 798
2016 832
2015 848
2014 526

International Journal of Machine Tools and Manufacture Publisher


Table Setting

International Journal of Machine Tools and Manufacture is published by Elsevier Ltd.. It's publishing house is located in United Kingdom. Coverage history of this journal is as following: 1987-2022. The organization or individual who handles the printing and distribution of printed or digital publications is known as Publisher.


Call For Papers


Visit the official website of the journal/conference to check the further details about the call for papers.


Abbreviation


The IS0 4 standard abbreviation of International Journal of Machine Tools and Manufacture is Int. J. Mach. Tools Manuf.. This abbreviation ('Int. J. Mach. Tools Manuf.') is well recommended and approved for the purpose of indexing, abstraction, referencing and citing goals. It meets all the essential criteria of ISO 4 standard.

ISO 4 (International Organization for Standardization 4) is an international standard that defines a uniform and consistent system for abbreviating serial publication titles and journals.


How to publish in International Journal of Machine Tools and Manufacture


If your research field is/are related to Industrial and Manufacturing Engineering (Q1); Mechanical Engineering (Q1), then please visit the official website of this journal.


Acceptance Rate


The acceptance rate/percentage of any academic journal/conference depends upon many parameters. Some of the critical parameters are listed below.

  • The demand or interest of researchers/scientists in publishing in a specific Journal/Conference.
  • Peer review complexity and timeline.
  • The mix of unsolicited and invited submissions.
  • The time it takes from manuscript submission to final publication.
  • And Many More.

It is essential to understand that the acceptance rate/rejection rate of papers varies among journals. Some Journals considers all the manuscripts submissions as a basis of acceptance rate computation. On the other hand, few consider the only manuscripts sent for peer review or few even not bother about the accurate maintenance of total submissions. Hence, it can provide a rough estimation only.

The best way to find out the acceptance rate is to reach out to the associated editor or to check the official website of the Journal/Conference.



Frequently Asked Questions (FAQs)


What's the latest impact IF of the International Journal of Machine Tools and Manufacture?

International Journal of Machine Tools and Manufacture latest impact IF is 14.12. It's evaluated in the year 2022. The highest and the lowest impact IF or impact score of this journal are 14.12 (2022) and 4.39 (2015), respectively, in the last 9 years. Moreover, its average IS is 7.61 in the previous 9 years.


What's the SCImago Journal Rank (SJR) of the International Journal of Machine Tools and Manufacture?

The International Journal of Machine Tools and Manufacture has an SJR (SCImago Journal Rank) of 3.579, according to the latest data. It is computed in the year 2023. In the past 9 years, this journal has recorded a range of SJR, with the highest being 3.979 in 2019 and the lowest being 2.618 in 2015. Furthermore, the average SJR of the International Journal of Machine Tools and Manufacture over the previous 9-year period stands at 7.61.


What's the latest h-index of the International Journal of Machine Tools and Manufacture?

The latest h-index of the International Journal of Machine Tools and Manufacture is 179.


Who's the publisher of the International Journal of Machine Tools and Manufacture?

The International Journal of Machine Tools and Manufacture is published by the Elsevier Ltd., with its country of publication being the United Kingdom.


What's the current ranking of the International Journal of Machine Tools and Manufacture?

The International Journal of Machine Tools and Manufacture is currently ranked 452 out of 27955 Journals, Conferences, and Book Series in the latest ranking. Over the course of the last 9 years, this journal has experienced varying rankings, reaching its highest position of 387 in 2019 and its lowest position of 848 in 2015.


What's the abbreviation or short name for the International Journal of Machine Tools and Manufacture?

The standard ISO4 abbreviation for the International Journal of Machine Tools and Manufacture is Int. J. Mach. Tools Manuf..


Is the "International Journal of Machine Tools and Manufacture" classified as a Journal, Conference and Proceedings, Trade Journal or Book Series?

International Journal of Machine Tools and Manufacture is classified as a journal that the Elsevier Ltd. publishes.


What's the scope or major areas of the International Journal of Machine Tools and Manufacture?

The International Journal of Machine Tools and Manufacture encompasses the following areas:

  • Industrial and Manufacturing Engineering
  • Mechanical Engineering

For a more comprehensive understanding of its scope, check the official website of this journal.


What's the ISSN of the International Journal of Machine Tools and Manufacture?

The International Journal of Machine Tools and Manufacture is assigned the following International Standard Serial Numbers (ISSN): 08906955.


What's the best quartile of the International Journal of Machine Tools and Manufacture?

The best quartile for the International Journal of Machine Tools and Manufacture is Q1 (2022).


What's the coverage history of the International Journal of Machine Tools and Manufacture?

The International Journal of Machine Tools and Manufacture coverage history can be summarized as follows: 1987-2022.


Credits and Sources


  • Scimago Journal & Country Rank (SJR), https://www.scimagojr.com/
  • Journal Impact Factor, https://clarivate.com/



Impact Score, h-Index, and Other Important Details of These Journals, Conferences, and Books


Journal/Conference/Workshop/Book Title Type Ranking Publisher h-index Impact Score
CESifo Economic Studies journal 14012 Oxford University Press 32 1.70
Istanbul University - Journal of Electrical and Electronics Engineering journal 24654 University of Istanbul 0 0.00
Journal of International Financial Management and Accounting journal 6179 Wiley-Blackwell Publishing Ltd 42 6.09
Materials Research journal 14791 Universidade Federal de Sao Carlos 65 1.62
Journal of Classical Sociology journal 13766 SAGE Publications Ltd 27 0.83
International Journal of Parallel, Emergent and Distributed Systems journal 15843 Taylor and Francis Ltd. 23 1.28
Journal of Education and Work journal 9268 Brill Academic Publishers 43 1.93
Howard Journal of Communications journal 9564 Taylor and Francis Ltd. 36 1.66
Sapporo Medical Journal journal 20468 Cancer Research Institute, Sapporo Medical University 3 0.00
Exploration Geophysics journal 16383 Taylor and Francis Ltd. 48 1.17

Check complete list




Year wise Impact Score (IS) of International Journal of Machine Tools and Manufacture

Impact Score Table

Year Impact Score (IS)
2023/2024 Coming Soon
2022 14.12
2021 10.13
2020 8.27
2019 8.65
2018 7.38
2017 6.01
2016 4.93
2015 4.39
2014 4.62



Top Journals/Conferences in Industrial and Manufacturing Engineering

Journal of Operations Management
John Wiley & Sons Inc. | Netherlands

Production and Operations Management
Wiley-Blackwell | United States

International Journal of Production Economics
Elsevier | Netherlands

International Journal of Production Research
Taylor and Francis Ltd. | United Kingdom

Robotics and Computer-Integrated Manufacturing
Elsevier Ltd. | United Kingdom

Chemical Engineering Journal
Elsevier | Netherlands

Journal of Manufacturing Systems
Elsevier | Netherlands

Journal of Industrial Information Integration
Elsevier BV | Netherlands

Additive Manufacturing
Elsevier BV | Netherlands

International Journal of Information Management Data Insights
Elsevier BV | Netherlands

See All

Top Journals/Conferences in Mechanical Engineering

Nature Materials
Nature Publishing Group | United Kingdom

Advanced Materials
Wiley-Blackwell | United States

Materials Science and Engineering: R: Reports
Elsevier BV | Netherlands

Science Robotics
American Association for the Advancement of Science | United States

Materials Today
Elsevier | Netherlands

Nano Letters
American Chemical Society | United States

International Materials Reviews
Maney Publishing | United Kingdom

Archive for Rational Mechanics and Analysis
Springer New York | United States

Applied Energy
Elsevier BV | United Kingdom

Progress in Aerospace Sciences
Elsevier Ltd. | United Kingdom

See All