Special Issue 2019 : [Coatings; IF2.330] Special Issue - From Metallic Coatings to Additive Manufacturing

Coatings (ISSN 2079-6412)
Special Issue "From Metallic Coatings to Additive Manufacturing"
https://www.mdpi.com/journal/coatings/special_issues/met_coat_addit_manuf


Dear Colleagues,

Metallic coatings are primarily fabricated through the deposition of powders layer by layer onto a substrate using various spraying processes. They are widely used as a functional surface modification to protect the underlying substrate from damage under corrosion, erosion, high-temperature, and other aggressive environments. The emerging additive manufacturing processes can be utilised in a similar manner. Typically, these processes will build 3D components with geometric precision by direct material deposition onto a substrate or alternatively by selectively melting material layer by layer on a powder bed. Additive manufacturing offers flexibility in geometric design, rapid production of components with complex geometry and high spatial resolution, and customization of products at an acceptable cost, and has little material waste through the recycling of unprocessed powder. Today, with the rapid development of modern industry and the launch of industry 4.0, high value-added components that are difficult to produce using conventional manufacturing processes are in great demand; this is particularly the case within cutting-edge fields such as the aerospace, nuclear, and energy industry. Since novel metallic coating and additive manufacturing techniques will be critical to future developments within these industries and many others, this Special Issue is dedicated to the recent advances in metallic coating and, in particular, additive manufacturing technologies and the transition between the two. Original research and critical review articles in the relevant topics are welcomed.

The topics of interest include, but are not limited to:

* Thermal spray, cold spray, laser cladding, PVD, CVD, and other coating technologies
* Selective laser melting, laser metal deposition, electron beam melting, and other additive manufacturing processes
* Numerical modelling on melting pool, material deposition, and manufacturing processes
* New coating, additive manufacturing, and 3D printing technologies
* Applications and case studies of additive manufacturing and 3D printing technologies

Prof. Dr. Rocco Lupoi
Dr. Shuo Yin
Prof. Dr. Guanjun Yang


When you choose Coatings, you benefit from:

- High visibility: indexed by the Science Citation Index Expanded (Web of Science), Scopus and Inspec (IET);
- Owning the full copyright to your work, and your article is free to read for anyone at any time;
- A rapid publication process: manuscripts are peer-reviewed and a first decision provided to authors approximately 17.2 days after submission; acceptance to publication is undertaken in 4.5 days (median values for papers published in this journal in the second half of 2018).

*Article Processing Charges*

Coatings is fully open access. Open access (unlimited and free access by readers) increases publicity and promotes more frequent citations, as indicated by several studies. Open access is supported by the authors and their institutes. The Article Processing Charges (APC) for accepted papers are CHF 1600. You may be entitled to a discount if you have previously received a discount code or if your institute is participating in the MDPI Institutional Open Access Program (IOAP), for more information see: http://www.mdpi.com/about/ioap.

*Submission Instructions*

To submit to the Special Issue, please click here:
http://www.mdpi.com/user/manuscripts/upload/?journal=coatings

For further details on the submission process, please see the instructions for authors at the journal website (http://www.mdpi.com/journal/coatings/instructions).

*Important Dates*
The submission deadline is 31 October 2019. All papers accepted for publication will be published immediately.